Main Accessory

There are two types sensors: manual calibration sensor and auto calibration sensor. The two types sensors can work with different throw ratios projectors for different size screens with different distances.

The laser emitter is used for finger touch. It can be fixed on the top of the projection screen to project a laser curtain, and the laser emitter is about 5cm away from the edge of the screen. There are two buttons on the laser emitter to control the front, back, left, and right directions of the laser curtain. You can use the double-sided adhesive tape to fix the laser emitter.

Pens are divided into long pens and short pens.The long pen in the manual positioning process, you must remember to press and hold the button above and click once. For short pens, there is no button, so you only need to click lightly, and the short pen is in use remember to unplug the pen cap before, and both the long pen and short pen need to be installed with AAA batteries.

The tips of our electronic whiteboard pens are all replaceable. The tips will wear out during writing, so you need to replace them with new tips.

The power cable with power adapter are used to supply power to the laser emitter.

The USB cable connects your sensor to the computer. Only when the computer and the sensor are connected the positioning software can be opened, otherwise an error will occur.

The function of the laser remote control is to turn on and turn off the laser emitter.